Why do Joy-Cons drift more than other controllers?

The Nintendo Switch's Joy-Con drift issue is caused by a fundamental design flaw according to a UK consumer group. As reported by Eurogamer, a report from Which claims that, even after just a few months of use, the Joy-Con's plastic circuit boards show significant wear on the joystick slider contact points.

Why do Joy-Cons drift more than other controllers?

This is because the sensors in the sticks eventually wears down. The joycons just wears down somewhat faster because they are way smaller than most controllers out there.

Why is my Joy-Con drift so bad?

A lot of the time, Joy-Con drift is caused by dust and grime building up inside the control stick mechanism. If you don't want to totally disassemble your Joy-Con—voiding the warranty in the process—you can still clean this dirt away to fix your Joy-Con.

Do new Joy-Cons suffer from drift?

Plus, since the Nintendo Switch Lite was released, some owners of the new, more portable Switch have claimed that they are suffering from Joy-Con drift too, on its non-detachable thumbsticks. The Switch OLED, meanwhile, has supposedly upgraded Joy-Cons but is also generating similar reports.

How common is Joy-Con drift?

According to UK consumer group Which?, 40 percent of Nintendo Switch users report that they have experienced issues with Joy-Con drift.

18 AMAZING Nintendo Switch secrets! 🔥😱🤯

Does Nintendo fix drift for free?

Nintendo has been repairing Switch players' Joy-Con "drift" issues for free, even if they're no longer under warranty, in North America since 2019.

Will Nintendo repair Joy-Cons for free?

Although Nintendo has offered free repairs for out-of-warranty Joy-Cons in North America, Latin America, and France, it never extended the policy to the UK, Switzerland, and all of the EEA until now.

How long do Joy-Cons last?

The Joy-Con controllers take approximately three and a half hours to fully charge. When fully charged, the battery for the Joy-Con controllers can last approximately 20 hours. This may be shorter depending on the software application and functions being used.

Do pro Controllers drift?

Drifting is a problem that is undeniably common in the Switch's Joy-Con, but it can also affect Pro Controllers as well. That's not to say Nintendo's products are cheap or shoddy universally; drift is an issue that can affect any controller on the market – even the mighty Xbox One Elite Controller isn't safe.

Can I use rubbing alcohol to clean Joy-Con?

Dampen a soft clean cloth with water, wring it out to remove excess water, then gently wipe the product. If you need to disinfect your products: Lightly apply a consumer-grade disinfectant containing about 70% alcohol to a soft clean cloth and gently wipe the product.

Why do modern joysticks drift?

Natural Decay Comes With Play. A common reason for why controllers run into drift problems is that they are prone to deterioration, which will naturally occur with use. In more recent years, the life cycle of technology has shortened dramatically to promote further purchases, thereby further exacerbating the issue.

What controller has less drift?

Most of the controllers on this list will use an ALPS analog stick, which is prone to degradation and stick drift. However, Gulikit's King Kong Pro 2 controller uses its own tech, which makes for an unbelievably accurate stick, that will never, ever drift. On top of that, the accuracy of the sticks is unparalleled.

Do pro controllers drift less?

Joy-Con drift is the most common form of drift for Nintendo. But although drift may be less common in Pro Controllers, they are not immune to it by any means.

How many Joy-Cons is too many?

[Switch] How many controllers can I pair with my console at the same time? Regardless of controller type (Joy-Con, Nintendo Switch Pro Controller, etc.), you can pair up to eight controllers with your Nintendo Switch console simultaneously.

Do Joy-Cons charge in Sleep Mode?

In order for the Joy-Con to charge while attached to the Nintendo Switch console, the console must be connected to the AC adapter and powered on or in Sleep Mode.

Is it bad to leave the Switch in the dock?

Leaving the console on the dock or plugged in directly with the AC adapter overnight, or past the point where the battery is fully charged will not cause harm to the battery.

Do I send both Joy-Cons for repair?

You can send in multiple Joy-con with one shipment. Again, the only downside is that Joy-con that can't be repaired may result in a replacement of a different color.

How much is replacement Joy-Con?

Nintendo is dropping the price of buying a single Joy-Con controller down to $39.99. That's $10 less than the $49.99 the company originally charged for single controller replacements.

How many Joy-Con sets can I send for repair?

From there you'll get a free label for up to four Joy-Con: if you want to do more, you'll need to fill out another form. The “reason for repair” line is even optional, so that's what I mean by “non-invasive.”

Is Joy-Con repair worth it?

it should do the trick. As long as they are offering to fix or replace your Joy-Con then replace it. You probably have to pay to ship it to them but that is far better then buying a new Joy-Con. So you have choices DIY or send to fix or replacement.

Why do controllers drift so easily?

The main natural cause for controller drift is dust and other debris. Things like food particles, pet fur, and dead skin can accumulate inside your controller and cause it to drift. The other reason your controller might start developing drift is natural wear and tear.

What controllers last the longest?

Far and away the longest lasting of the bunch is the Xbox 360's wireless controller. Although, like the Wii remote, it's not rechargeable, the 360's controller was able to run for nearly 60 hours on a single pair of Duracell AA batteries.

Why can't i fix controller drift?

Try adjusting the input threshold

Your input threshold is the area in which your controller doesn't register any movement. If you have a lot of drift on your joystick, decreasing the input threshold on the game you're playing can help. To do so, go to the settings in the game you're playing.